by Mr.Pex Mr.Pex

MrPEX® Composite Radiant Manifold

compositeMrPEX®  Composite Radiant Manifold is made from a durable high performance glass filled plastic designed to withstand high temperature and pressure. The manifold exceeds the oxygen diffusion standard NID 4726 and is completely corrosion resistant. The manifold comes partially assembled as a complete kit.

Kit Includes:

  • A complete supply body with positive shut-off balancing flow-meters, thermometer, a Fill/Drain valve with vent, and a blank end cap.
  • A set of mounting brackets
  • A set of 1″ NPT isolation union ball-valves

Plastic cap on the return valve can be removed to accommodate valve act uat or #5120700 or #5120701 (Adapter VA 90 #5700090 is needed) The branches have Eurokonus (EK20) connections, and all MrPEX® EK20 compression fitting assemblies (PEX to EK20 or PEX-AL-PEX to EK20) can be used to connect tubing up to 5/8″ to the manifold. Single, 2 loop, 3 loop, and 4 loop add-on supply and return manifold sections and other accessories are sold separately to allow for easy add-on.

by Mr.Pex Mr.Pex

MrPEX® Systems & LK Pex

From the left: Sales Director Theresa Gunnergren, Managing Director Mats Larsson, Production Manager Jyrki Hölsö cuts the band since he has been along since the start 1998, representative of the owners of the LK Group Claes Behm.

From the left: Sales Director Theresa Gunnergren, Managing Director Mats Larsson, Production Manager Jyrki Hölsö cuts the band since he has been along since the start 1998, representative of the owners of the LK Group Claes Behm.

Opening Ceremony of new production facility.

On September 3rd, LK Pex unveiled their brand new state-of-the-art production facility in Ulricehamn, Sweden. LK Pex is the sole supplier of PEX-a tubing for MrPEX® Systems who has the exclusive rights for the USA market. MrPEX® Systems offers Radiant Heating/Cooling, Snow Melting, and soon PEX-a Plumbing systems, has been selling LK Pex tubing in the USA since its inception in 2002.

The new 110 000 ft² production facility, only a few miles away from the previous location, is now open with several additional production lines increasing capacity to 263 million feet pipe/year. The new building, also owned by the LK Group might be the most energy efficient factory in Europe. A long term contract was established with a local district heating company to install a heat recovery system that captures the heat generated by the extruders to help with both heating the building, as well as allowing the waste energy to be sold back to the local community. It is estimated that LK Pex may be able to supply enough waste energy to heat the whole industrial park where they are located. Additionally, the entire building is equipped with LED-lighting, which reduces the lighting energy usage by 70%. “A significant step in reducing energy use, cost, as well as saving the environment. In designing this new production facility, we aimed to learn from past success, plus leveraging all available new technology to improve all aspects of the building and production process to the best of our abilities” says Mats Larsson, Managing Director at LK Pex. Additionally, as a strategic move, LK Pex secured the rights to buy the adjacent properties for future expansions.

Present at the opening ceremony were members of the owner family, local politicians, members of the boards within the LK Group, and Managing Directors from all companies within the LK Group.