MrPEX® Accessories feature extruded aluminum heat transfer plates and omega style aluminum heat transfer plates for even heat distribution in suspended applications. RetroPanel is used for retrofit applications on top of existing concrete or sub-floor.

Omega Style Aluminum Heat Transfer Plates

Omega Specifications:

  • 18″ long x 5″ wide
  • For 1/2″ PEX Tubing
  • 25 Gauge Aluminum
  • Low thermal mass
Part # Description Type Unit
6110702 Omega Style Heat Transfer Plates, 18″ x 5″ For 1/2″ Pex Box of 100

DuoTrack Extruded Aluminum Heat Transfer Plates

DuoTrack Benefits:

  • 48″ long x 3.75″ wide – easy handling
  • 3/8″ or 1/2″ tubing in one plate
  • Extruded Aluminum – Superior heat transfer
  • Pre-punched holes – Easy installation
  • Low thermal mass – Quick output response
Part # Description Type Unit
6110733 MrPEX DuoTrack, Extruded Heat Transfer Plates, 48″ x 3.75″ For 3/8″ or 1/2″ PEX Box of 20

RetroPanel Heat Transfer System

MrPEX® RetroPanel System

RetroPanel is a perfect retrofit product for applications where comfort, efficiency, system height, and performance is key. It uses the combination of metal on the surface, with high thermal conductivity and built-in insulation underneath, to maximize the heat output at low water temperatures. The metal surface also promotes an even temperature distribution across the floor, minimizing cold spots. The low thermal mass allows for a quick response to Retrofit system for existing applications changing load requirements. Retro Panel is unmatched in its ability to optimize system efficiency.

RetroPanel Benefits:

  • Snaps together– labor savings
  • 1/2” tubing—longer loops, fewer circuits
  • Tubing is protected against damage
  • Pre-insulated and low profile– great for retrofits
  • Highly conductive surface—high heat output and even temperature distribution
  • Water resistant—great for basements
  • Easy to cut if necessary to fit tight spaces and around obstructions
  • Low thermal mass —quick output response
Part # Description Type Unit
6114001 RetroPanel Straight for 1/2″ PEX Tubing 15.75″ x 31.5″ Box of 10
6114002 RetroPanel Turn-Around for 1/2″ PEX Tubing 15.75″ x 15.75″ Box of 10

Radiant Wood Track for 3/8″ PEX Tubing

MrPEX® Radiant Wood Track for 3/8” PEX Tubing

MrPEX® Radiant Wood Track is a low profile radiant heat underlayment sys-tem perfect for retrofit or new construction in either residential or commer-cial applications. It works with any hydronic heating systems, which is one of the most popular and efficient methods of generating heat. With the low water temperature requirements associated with radiant floor heating, it also lends itself perfectly to many other low temp heat sources such as ground source heat pumps or High Efficiency Boilers. The MrPEX® Radiant Wood Track comes in three standard panels, Run Panel, Turn-Around Panel, and Manifold Panel. Each panel is 12″ x 48″ and are marked for easy and optimal cutting to fit any layout.

Panel Thickness 5/8″
Panel Dimensions 12″ x 48″
Panel Weight 6.67 lbs.
Plywood Type CCX-Formaldehyde Free 5 ply Exterior Grade
Tubing Size 3/8″ Tubing
Tube Spacing 6″ on Center
Heat Transfer Convection / Conduction
Part # Description Type Unit
6115019 Radiant Wood Track for 3/8″ PEX Tubing, 12″ x 48″ Run Panel – 6″ O.C. Box of 10
6115029 Radiant Wood Track for 3/8″ PEX Tubing, 12″ x 48″ Turn-Around Panel – 6″ O.C. Box of 10
6115039 Radiant Wood Track for 3/8″ PEX Tubing, 12″ x 48″ Manifold Panel – 6″ O.C. Box of 10