MrPEX® 1 1/2″ Stainless Steel Manifolds are made from high-quality Type 304 stainless steel and comes fully assembled in 3?13 loop configurations. The manifold body supply and return inlet comes with 1 1/2 in. NPT flat gasket union to aid in installation. End cap, vent, drain/purge valve come factory mounted on the body. The branches come with G 1_ x EK 25 flat gasket on/off valves on the supply, and G 1_ x EK 25 flat gasket inline visual flowmeter 2-8 GPM with built-in balancing valves on the return. Use any of the MrPEX® EK 25 fitting assemblies (PEX to EK 25 or PEX-AL-PEX to EK 25) to connect tubing to the manifold.
| Loops | 7 |
|---|---|
| Branches | 7 |
| Unit Type | Each |
| Technical Data | |
|---|---|
| Material | Stainless Steel and Brass |
| Operating Pressure | 87 psi |
| Max Pressure @ 70 degrees F | 145 psi |
| Max differential pressure | 14.5 psi |
| CV Value | 6″Cv |
| Accepted media | Water, up to 50% propylene glycol |
| Loop Connection | EK25 (G1″ Eurocone) |
| Available Sizes | 3-13 loops |