PAP - Press Transition to FIP DZR - 1 in. PAP to 1 in. FIP - MrPEX Systems

Leading Provider

in North America

Leading Provider

in North America

Products

Home » Products » PAP – Press Transition to FIP DZR – 1 in. PAP to 1 in. FIP

PAP - Press Transition to FIP DZR - 1 in. PAP to 1 in. FIP

PAP – Press Transition to FIP DZR – 1 in. PAP to 1 in. FIP

MrPEX® Press Fittings for use with MrPEX® ASTM F1281-2005 PEX-AL-PEX tubing in radiant applications. The body is made from DZR brass, double o-rings, and a stainless steel press sleeve. An accurately installed press fitting offers a fast, reliable, and permanent connection.

SKU: 2331010 Category:

Additional information

Nominal Size

1 in. PAP to 1 in. FIP
Unit Type

Bag of 5
Unit Length

2.1 in.
Unit Width

1.51 in.

Description

Press Fittings for PEX-AL-PEX Tubing

NOTE: Must use reamer on any PEX-AL-PEX fittings

*NOT FOR POTABLE

Technical Data

Material Max Temperature
Brass 200 degrees F

Standards

  • ASTM F1281-2005

Listings

  • NSF-rfh
Barb Size ID OD
1/2″ 0.31″ 0.48″
5/8″ 0.45″ 0.63″
3/4″ 0.48″ 0.78″
1″ 0.83″ 1.01″
Top
IDC Control Center» Monitor all important aspects of the system in one place.
» Set temperatures and modes for individual zones.
» Adjust tank temperatures, humidity settings, and any other adjustable settings in the system.NextExploreFrom any device with our app, the user can access the system for an overview of their current operating conditions and adjust the system settings including:
IDC System comes fully programmedThe system programmer integrates the HVAC system with the unique and specific controls solution as defined by the project and the desires of the homeowner. Some of the configuration aspects include:» Add all inputs such as sensors and outputs to control all external devices.
» Define all operating parameters of the system including temperature, humidity, kWh usage, C02 levels, outdoor reset, etc.
»Design all aspects of the system and how the components all work together.PreviousNextExplore
IDC ComputerThe IDC system uses a Linux industrial PC with Hardshell™ Fanless Technology which helps ensure reliability by wrapping internal components in a durable, fanless & ventless enclosure which provides effective cooling while keeping airborne debris out.IDC ComputerPreviousNextExplore
Internet AccessThe system uses MQTT technology that allows secure high-speed access to the system from anywhere in the world on a device with our IDC app.

Apps are available for Android® and iPhone® phones and tablets.PreviousNextExplore
NextExploreIDC Sensors and
BACnet ThermostatsStrategically placed sensors, meters, or other communicating devices such as thermostats, provide the necessary feedback from the conditioned areas being controlled by the IDC system.Mr Pex IDC SensorPrevious
PreviousNextExploreInnotech Programmable
I/O BlocksBy partnering with Innotech, our system uses universal I/O blocks with programmable points, and native BACnet and Modbus communication. The blocks provide status and onboard diagnostics for guaranteed reliability.

All the wired devices in the system are connected though the input/output blocks.Programmable I/O
HVAC System Components» Geothermal Heat Pump
» Boiler
» Gas/Oil Furnace
» Snow & Ice Melt System
» Zone Controls
» Forced Air Heating & Cooling Equipment
» Radiant Heating & Cooling Systems
» Solar Thermal
» Hot Water Production & Recirculation Equipment
» HRV/ERV EquipmentPreviousExplore